If you’re interested in purchasing a UPS Battery, there are some things you should know before choosing one. With so many options available, it can be difficult to know what the best battery for your needs is.
Before you use your new UPS Power Solutions – Eaton, there are a few must-known facts that you need to know. UPS batteries are an essential component of the product, but they also require some special considerations to ensure that they’re working at peak performance and that you’re getting the most value out of them. This article will share some of those critical considerations with you, so read on to find out more about them!
- Batteries are not all made the same
The prices and quality of batteries vary quite dramatically and there are many factors that go into the type of battery. Lead acid batteries have the cheapest upfront cost, but it is costly in terms of maintenance. One alternative is nickel cadmium, which is more expensive than lead acid but will not require monthly maintenance. Another option would be to use lithium-ion batteries, which are lightweight and will typically last up to 10 years without degrading.
- A battery’s size isn’t always an indicator of its capacity
It’s no secret that not all batteries are created equal. This is why you should be able to identify which one you need and also what you can do with it. A battery’s size isn’t always an indicator of its capacity, so make sure to double check before shopping around. There are some specific batteries out there that might be better for your needs than the usual model from Staples or Best Buy.
- Just because it fits, doesn’t mean it works
#1 Check the Age: Lithium-ion batteries lose their capacity and have to be replaced every five years. If your battery is old, it might be worth the investment to replace it with a newer model.
#2 Plug into an Outlet: Low power outlets or simply not being plugged in can cause the charger to think the battery needs charging even when there is enough power available. To plug in, just make sure your battery is on and next to an outlet with full power. Make sure you’re plugged into an outlet that offers surge protection as well.
#3 Keep Cool: The best way to keep cool is to make sure your batteries stay out of direct sunlight – whether inside or outside of your business location.
- Re-Check the Data Sheet
Start by checking the label on the battery, which will be located near one of the ends. This label should indicate if the battery is rechargeable or not, as well as its voltage and amp hours (how much energy it can store). Next, compare the specifications listed on your UPS with those on your battery to ensure compatibility. Finally, check whether you have been using them at a fast charge rate or at 50% or less than their intended usage rate. Your UPS may have settings that will regulate these conditions and protect against overuse of your batteries.
If any of these indications are untrue, you must dispose of the battery for safety reasons!